How to install SDR++ (SDRpp) on Raspberry Pi
SDR++ (SDRpp) is an amazing multiplatform software for running SDR radios. For me, one of the many many reasons of
Continue readingHow to install SDR++ (SDRpp) on Raspberry Pi
Category: Blog
How to add Pluto+ or Adalm Pluto with Ethernet adapter into SDR# software
How to add Pluto+ or Adalm Pluto with Ethernet adapter into SDR# software? It is not straight forward job. When
Continue readingHow to add Pluto+ or Adalm Pluto with Ethernet adapter into SDR# software
3D Printed Case for a Raspberry Pi Zero ham radio MMDVM hotspot with ethernet hat and 4.3” Nextion Display
Hi All, just in case somebody wants to get a 3D Printed Case for a Raspberry Pi Zero ham radio
Raspberry Pi Relay Hat
Zero Relay – 2 Channel 5V Relay Board for Raspberry Pi – https://shop.sb-components.co.uk/products/zero-relay-2-channel-5v-relay-board-for-raspberry-pi https://wiki.52pi.com/index.php?title=EP-0099 https://amzn.eu/d/6jJzh7v
Bambu P1S (and X1C and P1P) – how to use a sideloaded filament together with the AMS?
Bambu P1S (and X1C and P1P) – how to use a sideloaded filament together with the AMS? Well, the first
How to delete Bambu Studio filament preset
How to delete Bambu Studio filament preset? It is quite easy to miss, so the tip is that you open
Problem with Bambu Lab fill painting tool.
The symptom – a random painting depth then printing using Bambu Lab P1S and Bambu Studio software. However, the problem
How to install Smokeping on QNAP NAS Server
How to install Smokeping on QNAP NAS Server? Unfortunately, the only one way I found so far is a container.
How to become a QNAP SSH admin
After login into your QNAP server through the SSH, you may find that despite using an admin account, you are
QO-100 Bullseye LNB Integrated 3d Printed Holder
Project: M0PPR QO-100 Bullseye integrated antenna Please note I do not take any responsibility for this project, you do it
Continue readingQO-100 Bullseye LNB Integrated 3d Printed Holder