3D Printed Case for a Raspberry Pi Zero ham radio MMDVM hotspot with ethernet hat and 4.3” Nextion Display
Hi All, just in case somebody wants to get a 3D Printed Case for a Raspberry Pi Zero ham radio
Pawel Rozenek's Website
Hi All, just in case somebody wants to get a 3D Printed Case for a Raspberry Pi Zero ham radio
This is a webpage of the GB7CF, DMR BRANDMEISTER repeater in Clanfield, Hampshire, UK Keeper: Pawel Rozenek M0PPR & Alan
This project is still alive. I keep uploading new drawings and pictures (November 2022). There is a bit of knowledge
Continue readingHow to make a UHF (and VHF too) duplexer for an amateur repeater.
Today I found an error in BI7JTA MMDVM modem. And it is a very strange problem, as previously everything was
Hi All, if you read this post probably your are a ham radio operator looking for help with Open VPN
Continue readingRaspberry Pi with Pi-Star Open VPN – client side
Mój Anytone 878 (taki sam problem będzie z 578) APRS beaconing przez długi czas działał prawidłowo. Niestety kilka dni temu
My Anytone 878 (it will be the same on 578) APRS beaconing was working absolutely fine for a long time.
Continue readingStrange problem with Anytone 878 (578) – fixed location beacon in permanently on
Amateur radio: SSH Updating hotspot firmware via Pi-Star Firmware release notes on GitHub: ZUMspot/MMDVM_HS ZUMspot board connected to GPIO: sudo
Continue readingHow to update firmware (*not* Pi-Star) software on your MMDVM Hotspot