Category: Blog
3D Printed Wind Turbine
This is my 3D printed Wind Turbine – files from here.
How to replace M8 threaded rods with 8mm T8 Lead Screws
Hi All, In my Geeetech I3 Pro W I have recently replaced replaced M8 threaded rods with nice T8 lead
Continue readingHow to replace M8 threaded rods with 8mm T8 Lead Screws
Geeetech I3 Pro W – 3D model of the printer
The Geeetech I3 Pro W is one of the cheapest 3D printers on the market (2018). It suffers from some
How to modify STL file in PTC Creo
It is impossible to modify in PTC CREO a STL file opened as a part. To do some extra cuts
My personal filament settings
eSUN 1.75mm PLA PRO Plus (PLA+) 3D Printer Filament Material 1KG Spool yellow – 225 (sometimes 220 or 230), bed
3D printed cable chain for Geeetech I3 Pro W printing bed
Just to save cables I decided to 3d print a cable chain. All stl files can be printed without supports.
Continue reading3D printed cable chain for Geeetech I3 Pro W printing bed
3D printed cable chain for Geeetech I3 Pro W extruder.
Just to save extruder cables I decided to 3d print a cable chain. All stl files can be printed without
Continue reading3D printed cable chain for Geeetech I3 Pro W extruder.
Creo Drawing – how to show drawing sheet numbers of total number
If you want to keep in your drawing a sheet number of total number, like to the picture below, type
Continue readingCreo Drawing – how to show drawing sheet numbers of total number